Language 
ABOUT MOSCADS    OUR CLIENTS    PROJECT REFERENCES    PRODUCTS    SOLUTIONS    CONTACT US   
   Products
Automatic Weather System
Converter & Reapater Module
Ethernet Switch
I/O Module DCON Protocol
I/O Module Modbus Protocol
Intelligent Power Meter
Learning Kits
Machine Vision Systems
PAC
Programmable Logic Controller
PXI Platforms
Robotic
Rugged Tablet Computers
Scada Software
Seismic Switch
Servomotor & Amplifier
Variable Frequency Drives
Wireless Communication
 
Converter & Reapater Module
I-7530A
  
  Datasheet
Intelligent RS-232/485/422 to CAN Converter

Main Features

  • Compatible with CAN specification 2.0A and B
  • Fully compatible with ISO 11898-2 standard
  • Support various bauds from 10K bps to 1M bps
  • Jumper for 120 Ù terminator resistor
  • Software configurable CAN and RS-232 /422/485 communication parameters
  • Power, data flow and error indicator for CAN and RS-232/422/485
  • Watchdog inside
  • Provide the transparent communication between the RS-232/485/422 devices via CAN bus
  • Enable different RS-232/485/422 devices into an individual group in CAN bus network.
    (Full-duplex communication mode of RS-232/422 devices is not supported)
Specifications
Specifications

CAN Interface

  • Transceiver
    NXP 82C250
  • Connector
    9-pin male D-Sub (CAN_L, CAN_H, N/A for others)
  • Port Channels
    1
  • Buad Rate
    10 k, 20 k, 50 k, 100 k, 125 k, 250 k, 500 k, 800 k and 1 Mbps
  • Protection
    power protection on CAN side, 2500Vrms photo-couple isolation on CAN bus
  • Terminator Resistor
    Selectable 120O terminator resistor by jumper
  • Support Protocol
    1000 data frames

UART Interface

  • COM
    RS-232?RS-485?RS-422
  • Connector
    14-pin terminal connector
    RS-232 : TxD, RxD, GND
    RS-422 : Tx+, Tx-, Rx+, Rx-
    RS-485 : D+, D-
  • Baud Rate
    110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
  • Data Bits
    5, 6, 7, 8
  • Stop Bits
    1,2
  • Parity
    None, Even, Odd
  • Receive Buffer
    900 data frames

Power

  • Power Consumption
    1W
  • Power Requirement
    Unregulated +10VDC ~ +30VDC. Power reverse protection, Over-Voltage brown-out protection

LED

  • Round LED
    ON LED: Power and Data Flow; ERR LED: Error

Mechanism

  • Installation
    DIN-Rail
  • Dimensions
    72mm x 118mm x 33mm (W x L x H)

Environment

  • Operating Temp.
    -25°C to 75°C
  • Storage Temp.
    -30°C to 80°C
  • Humidity
    10~90% non-condensing
Privacy Policy | Disclaimer
Copyright © 2007-2018 Moscads Exousia, Pt. All right reserved